GN 119 Latches


GN 119 Latches Material: ZD - Zinc die casting
Type: DK - Operation with triangular spindle (DK7)
Material: ZD - Zinc die casting
Type: DK - Operation with triangular spindle (DK7)
GN 119 Latches Material: ZD - Zinc die casting
Type: DK - Operation with triangular spindle (DK7) GN 119 Latches Material: ZD - Zinc die casting
Type: SG - Operation with star knob GN 119 Latches Material: ZD - Zinc die casting
Type: VDE - Operation with double bit GN 119 Latches Material: ZD - Zinc die casting
Type: VK7 - Operation with square spindle A/F7 GN 119 Latches Material: ZD - Zinc die casting
Type: VK8 - Operation with square spindle A/F8

Product description


Latches GN 119 have a pulling-in range of 10 mm. Locking is achieved by turning the latch clockwise.


Lock housing / operating bolt
Zinc die casting, chrome plated

Cam latch
Sheet Steel
zinc plated, blue passivated

Distance piece

Star knobs GN 5337.2
Plastic (Polypropylene PP)
black, matte



Socket keys GN 119.2
Protective caps GN 120
Opening handles GN 120.1

Technical drawing

Hide technical drawing
GN 119 Latches sketch

Article options / Table


SGOperation with star knob
DKOperation with triangular spindle (DK7)
VK7Operation with square spindle A/F7
VK8Operation with square spindle A/F8
VDEOperation with double bit
Show / Hide columns
Clamping range A1 ... A9
(Door + frame thickness)
A1...A9(Tür- +Zargenbreite)
A 1 (l=35)A 2 (l=40)A 3 (l=45)A 4 (l=50)A 5 (l=55)A 6 (l=60)A 7 (l=65)A 8 (l=70)A 9 (l=75)
17 - 2522 - 3027 - 3532 - 4037 - 4542 - 5047 - 5552 - 6057 - 65

Build & Price



Clamping range A

Construction and assembly instructions

Sketch GN 119 assembly

By turning the latch clockwise the stepped cam latch moves up behind the door frame and pulls the door in.

The large pulling-in range of the cam (10 mm) allows these locks to be used successfully on doors with sealing strips. When selecting clamping range ‚A‘ the thickness of the door seal might have to be taken into consideration.

To fit the lock, the door will have to be provided with a hole as per sketch shown at a distance from the door frame to hole center of 23 mm.

The lock housing with the preassembled operating bolt is fitted into the hole from the front and held in position with the hexagon nut. The distance piece and the cam latch are then fitted at the rear and fixed with the hexagon nut.

In volume production, the mounting borehole in the door leaf is usually made by punching or laser machining.

For small series and steel sheets below 2 mm thickness, the Sheet metal punches GN 123 are the tool of choice.

Sketch GN 119 bore

The installation bore diameter can also be set by drilling / milling as shown in the outline drawings opposite.

Selected Part (How to order)

Total (net)
plus VAT 1,53 €
gross 9,59 €
In stock
Weight: 0,104 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data


For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.

JW Winco, USA

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.


Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.