Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
The rotary clamping latches GN 516 have a closing mechanism which transfers the rotary movement of the operating element resp. socket key into a 90° turn and then into a 6 mm linear stroke of the latch arm.
This mechanism is designed to form a tight and vibration-proof latch in the end position (retaining position) in connection with an elastic element, such as a door or casing seal.
Latch arms with different bend angles cover a latch arm distance A (retaining range) from 17 to 63 mm. If the measured retaining position lies between two latch arm distances A, the next smaller value must be selected.
The rotary clamping latches GN 516 are are supplied with loosely enclosed latch arm.
Lock housing /
Locking mechanism
Zinc die casting
Housing collar
Powder coated
Black, RAL 9005, textured finish
Latch arm
Steel, zinc plated, bue passivated
Operating elements (Type RG / KG / HG)
Protection class IP 65
RoHS
Socket Keys GN 119.2
Protective Caps GN 120
Opening Handles GN 120.1
Sheet Metal Punches GN 123
| DK | With triangular spindle |
| VK7 | With square spindle |
| VK8 | With square spindle |
| SCH | With slot |
| VDE | With double bit |
| RG | With knurled knob GN 7336 |
| KG | With wing knob |
| HG | With lever |
| Latch distance A :: in retaining position (clamping position) | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 17 | 19 | 21 | 23 | 26 | 27 | 29 | 31 | 33 | 35 | 37 | 39 | 41 | 43 | 45 | 47 | 49 | 51 | 53 | 55 | 58 | 63 |
|
For installation, set a hole in the door, cover or hatch as shown in the outline drawing. When installed, the rotary clamping latches are inserted through the hole from the front. The hexagon nut can then be pushed over the latch from the back and bolted in place. The required installation bore in the door leaf, is usually generated by punching or laser machining in series production. The installation bore diameter can also be created by drilling or milling as shown in the outline drawings. For small series and steel sheets below 2 mm thickness, the Sheet Metal Punches GN 123 are the tool of choice. |
||||||||||
|
Load of rotary clamping latches |
|||||||||||
|
Max. torque |
4.5 Nm |
||||||||||
|
|||||||||||
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
