GN 2291 Hinge wings for aluminum profiles / panel elements

Photo

GN 2291 Hinge wings, for aluminum profiles / panel elements Type: AN - exterior hinge wing, with guide step
Identification no.: C - with countersunk holes
Type: AN - exterior hinge wing, with guide step
Identification no.: C - with countersunk holes
GN 2291 Hinge wings, for aluminum profiles / panel elements Type: AN - exterior hinge wing, with guide step
Identification no.: C - with countersunk holes GN 2291 Hinge wings, for aluminum profiles / panel elements Type: AF - exterior hinge wing
Identification no.: A - without bores GN 2291 Hinge wings, for aluminum profiles / panel elements Type: AF - exterior hinge wing
Identification no.: C - with countersunk holes GN 2291 Hinge wings, for aluminum profiles / panel elements Type: AN - exterior hinge wing, with guide step
Identification no.: A - without bores GN 2291 Hinge wings, for aluminum profiles / panel elements Type: IF - interior hinge wing
Identification no.: A - without bores GN 2291 Hinge wings, for aluminum profiles / panel elements Type: IF - interior hinge wing
Identification no.: C - with countersunk holes GN 2291 Hinge wings, for aluminum profiles / panel elements Type: IN - interior hinge wing, with guide step
Identification no.: A - without bores GN 2291 Hinge wings, for aluminum profiles / panel elements Type: IN - interior hinge wing, with guide step
Identification no.: C - with countersunk holes

Accessories for profile systems

Standard elements in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Ganter standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

  • compatible with the common profile systems
  • for groove widths of 6, 8 and 10 mm
  • for profiles 30, 40 and 45 mm

Further information on products for profile systems:

Product description

Information

GN 2291 Hinge wings can be combined with GN 2290 bolt sets into individualized hinge versions.

As of a hinge wing length of l2 ≥ 250 mm, individual lengths can be realized by shortening the hinge wing given the greater hole spacings.

Specification

Aluminum
anodized, natural colorEL

RoHS

Accessory

Bolt sets GN 2290

On request

other lengths and hole spacings
other finishes

Technical drawing

Hide technical drawing
GN 2291 Hinge wings, for aluminum profiles / panel elements sketch

Article options / Table

Type

AFexterior hinge wing
ANexterior hinge wing, with guide step
IFinterior hinge wing
INinterior hinge wing, with guide step

Identification no.

Awithout bores
Cwith countersunk holes
Show / Hide columns
l1
Type AF / AN

Type IF / IN
l2d1d2d3l3l4m1
Type AF / AN

Type IF / IN
m2m3m4-0,3
43504080250*400*6,6148364320,427,550501508
*only available in types AF / IF

Build & Price

l1 (Type AF / AN)
l1 (Type IF / IN)
l2
Type




Identification no.


Finish

Mounting information

left / right hinges

Right or left hinges can be created by the direction in which the bearing bushings are inserted into the hinge wing.

Mounting on door frames

Two hinges of the same type must be mounted on the door frame if the door is removable.

If the door is not supposed to be removable, the door must be mounted with at least one right hinge and at least one left hinge.

Mounting

1. Position the bearing bushing with the desired installation direction on the hinge wing. Then insert a screw with a collar such as an ISO 7380 oval head screw into the bearing bushing to protect the bearing bushing collar from damage while pounding in.
2. Pound in the bearing bushing until about 1 mm remains between the bearing bushing
collar and the hinge wing.
3. Remove the burr on the bearing bushing using a knife.
4. Pound in the bearing bushing all the way.
5. Remove the screw.
6. Pound a tapered dowel pin into the bearing bushing.
7. Place the cover cap on the opposite side of the hinge wing.

Insert the other bearing bushings according to points 1 to 5.

Selected Part (How to order)

Weight: 0,023 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

At present, there is no direct download of 3D CAD data or 2D data for this article. Please send your inquiry by email directly to us. As soon as possible, we will send you the desired CAD-data.

Please add here your E-mail !


Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.