GN 2295 Hinges for aluminum profiles / panel elements, three-part

Photo

GN 2295 Hinges, for aluminum profiles / panel elements, three-part Type: A - exterior hinge wings
Identification no.: C - with countersunk holes
Type: A - exterior hinge wings
Identification no.: C - with countersunk holes
GN 2295 Hinges, for aluminum profiles / panel elements, three-part Type: A - exterior hinge wings
Identification no.: C - with countersunk holes GN 2295 Hinges, for aluminum profiles / panel elements, three-part Type: I - interior hinge wings
Identification no.: C - with countersunk holes
Zubehoer-fuer-Profilsysteme

Accessories for profile systems

Standard Parts in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Ganter standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

  • compatible with the common profile systems
  • for groove widths of 6, 8 and 10 mm
  • for profiles 30, 40 and 45 mm

Further information on products for profile systems:

Product description

Information

GN 2295 Hinges are made of drawn profiled aluminum and are used on doors and covers, for example.

Given the external hinge wing, type A hinges allow mounting with a very small door gap. The type I is fastened in the door gap. The mounting screws are therefore inaccessible and hence protected from vandalism when the door is closed.

The hinges are delivered loose and must be mounted according to the accompanying instructions. Any hinge combination may be realized (if needed, also by shortening the middle wing) thanks to the modular design and available accessories.

Specification

Aluminum
anodized, natural colorEL

Bearing bushing / cover cap
  • Plastic
    Technopolymer (Polyamide PA)
  • gray, RAL 7035

Tapered dowel pin ISO 8741
Steel zinc plated, blue passivated


RoHS

On request

other lengths and hole spacings
other finishes

Technical drawing

3D
Hide technical drawing
GN 2295 Hinges, for aluminum profiles / panel elements, three-part sketch

Article options / Table

Type

Aexterior hinge wings
Iinterior hinge wings

Identification no.

Cwith countersunk holes
Show / Hide columns
l1
Type ÄA

Type I
l2 - l4d1d2l3l5l6m1
Type A

Type I
m2m3m4m5m6s
7286125 - 40165 - 806,61440364340,85542,537,550--3,5
7286335 - 250485 - 4006,61440364340,855---72,51503,5

Build & Price

Specifications

l1 (Type A)
l1 (Type I)
l2
Type


Identification no.

Finish

Mounting information

Mounting information 1

left / right hinges

Right or left hinges can be created by the direction in which the bearing bushings are inserted into the hinge wing.

Mounting information 3

Mounting

1. Position the bearing bushing with the desired installation direction on the hinge wing. Then insert a screw with a collar such as an ISO 7380 oval head screw into the bearing bushing to protect the bearing bushing collar from damage while pounding in.
2. Pound in the bearing bushing until about 1 mm remains between the bearing bushing
collar and the hinge wing.
3. Remove the burr on the bearing bushing using a knife.
4. Pound in the bearing bushing all the way.
5. Remove the screw.
6. Pound a tapered dowel pin into the bearing bushing.
7. Place the cover cap on the opposite side of the hinge wing.

Insert the other bearing bushings according to points 1 to 5.

Selected Part (How to order)

Total (net)
14,12
plus VAT 2,68 €
gross 16,80 €
In stock
Weight: 0,095 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.