Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Spring plungers GN 614 are used as detents as well as for push-on and push-off applications and ejectors.
A tolerance of H7 for the location hole of d1 is recommended.
Type MS
Type KU
Type KD
Pressure spring
Stainless steel AISI 631
RoHS
| MS | Housing brass, ball stainless steel, standard spring load |
| KU | Housing plastic, ball stainless steel, standard spring load |
| KD | Housing plastic, ball plastic, standard spring load |
| d1 +0,1 KU | KD | MS | d2 MS | KU KD | d3 | l1 ≈ MS | KU KD | l2 ±0,1 | w Compression KU KD | MS | Spring load in N ≈ MS initial | End | KU / KD initial | end |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | - | 3 | 2,4 | 2 | 3,6 | 4 | 4 | 0,6 | 0,55 | 0,6 | 1,8 | 3,5 | 1,7 | 3,5 |
| 4 | 4 | 4 | 3 | 3 | 4,6 | 5 | 5 | 1 | 0,8 | 0,8 | 2,5 | 6 | 3 | 6,5 |
| 5 | 5 | 5 | 4 | 4 | 5,6 | 6 | 6 | 1 | 1 | 1 | 3 | 6,5 | 6 | 9,4 |
| 6 | 6 | 6 | 5 | 5 | 6,5 | 7 | 7 | 1 | 1,6 | 1,6 | 5,5 | 11,5 | 6,2 | 12,6 |
| 8 | 8 | 8 | 6,5 | 6,5 | 8,5 | 9 | 9 | 1 | 1,9 | 1,9 | 7 | 12,5 | 10 | 20,4 |
| 10 | 10 | - | 8,5 | 8 | 11 | 13 | 13,5 | 1,5 | 2,4 | - | 8,5 | 18,5 | 11,9 | 22,3 |
| 12 | 12 | - | 10 | 10 | 13 | 16 | 16 | 1,5 | 3,3 | - | 12 | 26,5 | 14 | 25 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
