Type: AL - Forked clamping arm, with two flanged washers
Product Family Stainless Steel Quality Class 2
The Ganter product range includes a large number of standard parts made of high-quality, non-rusting stainless steels. Thanks to their outstanding material properties, these are used in a wide array of industries. Their corrosion and rust resistance in particular contributes to the value stability and longevity of machines and equipment.
For easier differentiation, the stainless steels used by Ganter are divided into stainless steel quality classes:
Stainless Steel Quality Class 1
Stainless Steel Quality Class 2
Stainless Steel Quality Class 4Show detailed information on the stainless steel quality classes
Show all stainless steel products
Product description
Toggle clamps GN 810.3 are latched in both end positions. In the clamped position, this prevents unintentional opening or opening caused by vibrations; and in the open position, it prevents self-closing of the toggle clamp, such as due to an extended clamping arm. The latching can be disabled with a single hand to allow for opening / closing.
They work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
Toggle clamps in the U-bar version with two flanged washers (type AL) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type CL.
Type EL version can be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, to hold the work piece in place.
Specification
Tensioning mechanism
Stainless steel AISI 304NI
Moving parts lubricated with special grease
Handle
Plastic
Red, oil resistant
Clasp for type EL
Stainless steel AISI 304
Flanged washers GN 898 for type AL / CL
Stainless steel AISI 304
Clamping screw GN 708.1 for type CL
- Stainless steel AISI 304
- Thrust pad
Chloroprene rubber (CR)- Hardness 85 Shore A ≈
- Vulcanized
- Black
- Type A (flat pressure area)
RoHS
Accessory
GN 801.3 Sensor Holders
GN 801 Holders for Clamping Screws (for Type AL
)
GN 801.1 Clamping Arm Extenders (for Type AL
)
GN 801.2 Clamping Arm Extenders (for Type AL)
GN 809.1 Clamping Arm Extenders (for Type EL)
GN 807 Clamping Screws (Stainless Steel)
GN 708.1 Clamping Screws (Stainless Steel)
GN 903 Clamping Screws (Stainless steel)
