JW Winco

Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com

GN 200 Stainless Steel-Indexing mechanisms


GN 200 Stainless Steel-Indexing mechanisms Type: AS - with scale 0...50, 60 graduations
Type: AS - with scale 0...50, 60 graduations
GN 200 Stainless Steel-Indexing mechanisms Type: AS - with scale 0...50, 60 graduations GN 200 Stainless Steel-Indexing mechanisms Type: A - without scale

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description


Stainless Steel-Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.

Besides the standard scale (Type AS) the control knob version may be supplied with any scale.

Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“.


Stainless SteelNI
AISI 303

Type AS:
  • Scales engraved with laser precision,
  • Reference line on location ring

Keyway P9 DIN 6885/1
for bore K 10
Keyway P9 DIN 6885/2
for bores > K 10


On request

Special graduations
see „How to order Graduations“

Technical drawing

Hide technical drawing
GN 200 Stainless Steel-Indexing mechanisms sketch

Article options / Table


Awithout scale
ASwith scale 0...50, 60 graduations
Show / Hide columns
d1 -0,5d2 H7
Bore with keyway K
P.C.D. Ø
for fixing
Bore length
44K 10K 12-332333376314
52K 12K 14K 164231,541,837,5631,54

Build & Price

Open 3D configurator

Outside diameter d1
Bore d2



With these indexing mechanisms, shaft and lead screws can be turned and positioned in steps of 6° or multiples of it.


The indexing mechanism is a selfcontained unit, all the adjusting and securing components are housed in the smallest possible space. The unit consists of three main parts:

- Bushing – can be connected to the shaft with a key or crossdowel.
- Location ring – is screwed and doweled to the machine or equipment. The bushing is also a bearing for the location ring.
- Knurled housing – providing engagement between the locating ring and the shaft which can be turned or positioned.

In the locked position, the knurled housing via the internal teeth (60) connects the locating ring and the bushing (both via external teeth), the latter being connected to the shaft. To turn the shaft, the knurled housing is pulled out against the spring pressure, disengaging from the location ring, but still engaged with the bushing.

More information

With 60 teeth, the following divisions can be achieved: 2, 3, 4, 5, 6, 10, 20, 30.
A simple method provides indexing of the shaft to limited number of positions only, i.e. every 120°.
For this purpose, the location ring is manufactured with a dowel which allows engagement only when the bushing is provided with a corresponding hole (see assembly examples).
This hole can be manufactured oversize as the dowel is for rough positioning only. Accurate positioning is maintained via the teeth.
Knurled housing and tension levers can be supplied with scales and symbols.
With teeth, a more accurate and wear-resistant indexing mechanism is obtained than with single dowel locations.
When a very high torque is to be transmitted, engaging and disengaging of the teeth is made difficult due to the small clearance, i.e. the friction between them. In such cases, indexing levers GN 215 are recommended.

Selected Part (How to order)

Total (net)
plus VAT 13,12 €
gross 82,17 €
In stock
incl. material surcharge: 1,08 €
The material surcharge is already included in the price.
Weight: 0,309 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount
With a total value (net) per order:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 50,00 €
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

Other data formats


For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

GN 200-44-K12-A-NIGN 200-52-K12-A-NIGN 200-44-K10-A-NIGN 200-52-K16-AS-NIGN 200-52-K14-A-NIGN 200-52-K14-AS-NIGN 200-44-K12-AS-NIGN 200-44-K10-AS-NIGN 200-52-K16-A-NIGN 200-52-K12-AS-NI

This could also be interesting...


Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM:

Request Callback
Your contact

You are looking for a Ganter partner near you? Please select the country.