Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com

You are here: Product Overview > 3.3 Hinging, Latching, Locking of Doors and Covers > Hinges with Electrical Switching Function > GN 139.5 Hinge with Safety Switch previous product next product

GN 139.5 Hinge with Safety Switch Stainless Steel

Photo

GN 139.5 Hinge with Safety Switch with Connector Cable Type: CK - Cable from the back

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

corrosion-resistant
precise fit
environmentally friendly

Show all Stainless Steel products

Standard sheet GN 139.5 Print this page

Product description

Information

Hinges GN 139.5 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO). The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable.

Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.

Specification

Stainless steel precision casting AISI 316L
Polished, Ra < 0,8 µm

Pin
Stainless steel AISI 316L

RoHS

Accessory

Hinges GN 139.6 without Switch

On request

Hinges with operating angle > 0°
Hinges with other contact loadings

Technical drawing

GN 139.5 Hinge with Safety Switch with Connector Cable sketch

Hide technical drawing

Article options / Table

Type

CK	Cable from the back

Show / Hide columns

l₁	l₂	l₃	l₄	l₅	l₆ Cable length in meter Type CK		h₁	h₂	m₁	m₂	m₃	m₄

76	126	40	99.4	22	2	5	15.5	31.5	88	29	41	9

Build & Price

Open 3D configurator

Specifications

GN 139.5 Hinge with Safety Switch with Connector Cable

GN 139.5 Hinges with Safety Switch with Connector Plug

Width l₁

76

Length l₂

126

Type

CK - Cable from the back

Cable length (in meter) l₆

2

5

Mechanical features

Maximal load

Information with safety factor

Load
direction

Examples of calculation
→ see Operating instruction

F max.

2000 N

Fixing

from the back, 10 x threads M6, 8 mm deep

Recommended torque

10 Nm (Screws M6)

Protection type

IP67 / IP69K
(Mind the cable conduit!)

acc. to EN 60529

Switching principle, contact opening

Slow-action contacts
force-fitted, with positive opening

acc. to IEC 60947-5-1

Contact material

Silver alloy

Operating travel diagram
(scheme)

The switching points are adjustable up to 2° in direction of 0°.
→ see operating instruction

Maximum operating frequency

600 operating cycles / hour

acc. to IEC 60947-5-1

Mechanical life span

10⁶ operating cycles

Actuating speed

min. 2° / second, max. 90° / second

Electrical properties/safety properties

Utilization category

AC 15: 24 Vac / 2A / DC 13: 24 Vdc / 2A (connector plug)
AC 15: 250 Vac / 3A / DC 13: 250 Vdc / 0,3 A (cable)

acc. to EN 60947-5-1

Contacts, termination
8-pole connector M12 or
9 wire cable with
2 m or 5 m length
Pin and cable assignment

Type of cable

9x0,34 mm², PVC H05VV-F, black

acc. to IEC 60332-1

Short-circuit current

1000 A

acc. to EN 60947-5-1

Rated insulation voltage

30 V AC / 36 V DC (connector plug) / 250 Vac (cable)

Short-circuit protection

2 A, 500 V, Typ gG (connector plug) / 3 A, 500 V, Typ gG (cable)

Ambient temperature

-13 °F up to +176 °F (- 25 °C up to + 80 °C)

Degree of pollution, external

3

acc. to EN 60947-5-1

Safety parameters

B10: 1 000 000, B10 d: 5 000 000,
B10 / B10 d: 20%

acc. to EN ISO 13849-1

Other important details and hints are given in the operating instruction for GN 139.5 hinges which are included with every hinge and which are also available as PDF downloads from Operating instructions.

The hinges with safety switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any
consequences arising therefrom.

Selected Part (How to order)

Part number

Total (net)

427,16 €

plus VAT 81,16 €
gross 508,32 €

In stock

Weight: 1,034 kg

If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0

RoHS: Yes

This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).

Please note our order discounts.

With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 50,00 €

Quantity

All prices in accordance with our price list No. 55, valid from 1 September 2022, plus VAT only valid for Germany.