JW Winco

Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com

GN 160.1 Hinge detachable/ with eccentric pin / plastic


ELESA original design
code: CFO.

Product description


On hinges GN 160.1 the two pin halves which form the fulcrum are offset from each other by 0.5 mm and therefore, eccentric. Hence the position of the door can be altered or readjusted in relation to the frame.


Plastic (Polyamide PA)
  • glass fiber reinforced
  • black, matte
  • temperature resistant up to 80° C

Plastic (Polyacetal POM)


Technical drawing

Hide technical drawing
GN 160.1 Hinge with eccentric pin, Plastic sketch

Article options / Table

Show / Hide columns

Build & Price

Open 3D configurator
Width l1
Length l2

Construction and assembly instruction

The hinge section is to be attached to the door frame with the octagon holder.

The caps are removable, allowing the pin to be inserted from both sides. The fixed hinge section can so be attached to a door frame positioned either on the left or on the right.

First insert the pin such that the reference marking of the pin coincides with the arrow at the hinge.

The eccentric pin is to be placed in eight positions via the octagon.

Depending on position, I1 changes: min. 34.5 / max. 35.5.

Sketch GN 160.1 assembly Sketch GN 160.1 reference

Aligning the door

To align the door, the eccentric pin of the top and bottom hinge may be turned into the required position.

Sketch GN 160.1 down Sketch GN 160.1 up

Hinge 1: Turn pin anti-clockwise

Hinge 2: Turn pin clockwise

Hinge 1: Turn pin clockwise

Hinge 2: Turn pin anti-clockwise

Hinge layout

Door unhingeable

Door unhingeable

Sketch GN 160.1 unhingeable Sketch GN 160.1 n. unhingeable

Top hinge section:
pin turned by 180°, cover attached on the opposite side.
The top hinge section may be mounted to the frame only after the bottom hinge has been hung.

Selected Part (How to order)

Total (net)
plus VAT 0,60 €
gross 4,33 €
In stock
Weight: 0,025 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data


For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...


Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.


Ask for it free of charge

Your contact

You are looking for a Ganter partner near you? Please select the country.