Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
T-nuts GN 505 can be inserted vertically into a T-slot like rhombus T-nuts GN 508.1.
When tightening the clamping bolt, the nut will be forced into a crosswise position by the applied torque and firmly anchored in the T-slot.
This action is achieved by using T-nut with increased torque (Type MB) which is intentionally fitted with an overtight fit requiring a higher torque.
To remove the bolt and T-nut a 90° anticlockwise turn is sufficient to withdraw the two components with the clamped workpiece.
The clamping face of the T-nut is serrated to ensure that a possible plating coat in the T-slot is penetrated to establish a good electrical contact.
Steel
Zinc plated, blue passivated
RoHS
| MB | With increased torque |
| OB | Without increased torque |
| a -0,1 / -0,5 | d | e1 -0.1 / -0.5 | e2 ±0,5 | h1 | h2 -0,4 | |||
|---|---|---|---|---|---|---|---|---|
| 8 | M 4 | M 5 | M 6 | - | 8 | 16 | 1,6 -0,4 | 5 |
| 10 | M 4 | M 5 | M 6 | M 8 | 10 | 19 | 3,5 -1 | 5,8 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
