GN 820 Toggle Clamps Steel, Operating Lever Horizontal, with Horizontal Mounting Base

Toggle clamps GN 820 work according to the toggle principle: lever and clamping bar move in the opposite direction.

They require less space for the clamping action. In the clamped position the operating lever is in its horizontal position.

Toggle clamps in the U-bar version with two flanged washers (type M) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type MC.

Toggle clamps in the type O version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component.

Specification

• Steel
  • Case hardening steel C10
    Zinc plated, blue passivated
  • Bearing pins tempered
  • Bearing rivets (for size 355 and up) case-hardened

• All moving parts
  Lubricated with special grease

• Solid designed plastic handle
  Red, oil resistant

• Clamping screw GN 708.1, type A
  • Steel, zinc plated
  • Rubber thrust pad 85 Shore A

RoHS

Accessory

GN 801.3 Sensor Holders
GN 801 Holders for Clamping Screws
GN 801.1 Clamping Arm Extenders
GN 801.2 Clamping Arm Extenders
GN 809.1 Clamping Arm Extenders
GN 804 Clamping Screws
GN 807 Clamping Screws (Steel)
GN 708.1 Clamping Screws (Steel)
GN 802 Clamping Screws (Steel)
GN 903 Clamping Screws (Steel)