Product description
Toggle clamps GN 812.1 work according to the toggle principle, lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position. They can be mounted in two perpendicular planes via the dual flanged mounting base and require less space for the clamping action.
Toggle clamps with forked clamping arm, with two flanged washers (type AVF) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type CVF.
Toggle clamps in type EVF can be adapted to special requirements by welding with the supplied clasp.
Specification
Tensioning mechanism
Steel
- Sheet metal parts
Case hardening steel C10, zinc plated, blue passivated - Bearing pins tempered
- Bearing rivets case-hardened
- Moving parts lubricated with special grease
Handle
Plastic
red, oil resistant
Clasp for type EVF
Steel zinc plated, blue passivated
Flanged washers GN 898 for type AVF / CVF
Steel zinc plated, blue passivated
Clamping screw GN 708.1 for type CVF
- Steel, zinc plated, blue passivated
- Thrust pad
Chloroprene rubber (CR)- Hardness 85 Shore A ≈
- Vulcanized
- Black
- Type A (flat pressure area)
RoHS
Accessory
GN 804 Clamping Screws
GN 801 Holders for Clamping Screws
GN 807 Clamping Screws (Steel)
GN 708.1 Clamping Screws (Steel)
GN 802 Clamping Screws (Steel)
GN 903 Clamping Screws (Steel)
