Stainless Steel Leveling Sets GN 350.5

Product Family Stainless Steel Quality Class 1

The Ganter product range includes a large number of standard parts made of high-quality, non-rusting stainless steels. Thanks to their outstanding material properties, these are used in a wide array of industries. Their corrosion and rust resistance in particular contributes to the value stability and longevity of machines and equipment.

For easier differentiation, the stainless steels used by Ganter are divided into stainless steel quality classes:

Stainless Steel Quality Class 1

Stainless Steel Quality Class 2

Stainless Steel Quality Class 4

Show detailed information on the stainless steel quality classes

Show all stainless steel products

Stainless Steel Characteristics

Product description

Stainless steel leveling sets GN 350.5 are used for leveling, adjusting and linking operations. The spherical washer allows precise installation of two non parallel planes at a required gradient up to ≈ 4°.

They comprise a threaded upper sleeve and an internal threaded lower sleeve. The fine thread allows a stepless and precise setting and locking using the C-Spanner DIN 1810. A locking ring serves as a height limiter for the max. height.

Specification

Stainless steelNI AISI 303
(X 10 CrNiS 18-9)

F₁: max.total load
F₂: max. load after deduction
of the max. preload
for screws 6.8, µ = 0,14

RoHS

Accessory

C-Spanner DIN 1810 (Code no. see table)

Your contact

You are looking for a Ganter partner near you?

d₁	d₂	h₁ Version Low	High	d₃	h₂ Version Low	High	h₃ Adjustable range Version Low	High	for screw	Static load F in kN F₁	F₂	C-Spanner

25	6,6	27	40	M 15 x 1	31	50	4	10	M 6	27,1	20,26	DIN 1810-A25-28
32	6,6	32	49	M 20 x 1	37	63	5	14	M 6	43,4	36,56	DIN 1810-A30-32
32	9	32	49	M 20 x 1	37	63	5	14	M 8	43,4	30,86	DIN 1810-A30-32
32	11	32	49	M 20 x 1	37	63	5	14	M 10	43,4	23,41	DIN 1810-A30-32
45	11	41	61	M 30 x 1,5	48	79	7	18	M 10	84	64,01	DIN 1810-A45-50
45	13,5	41	61	M 30 x 1,5	48	79	7	18	M 12	84	54,82	DIN 1810-A45-50
45	17,5	41	61	M 30 x 1,5	48	79	7	18	M 16	84	28,9	DIN 1810-A45-50
58	17,5	53	79	M 40 x 1,5	62	102	9	23	M 16	148	92,9	DIN 1810-A58-62
58	22	53	79	M 40 x 1,5	62	102	9	23	M 20	148	59,08	DIN 1810-A58-62
58	26	53	79	M 40 x 1,5	62	102	9	23	M 24	148	20,3	DIN 1810-A58-62
70	22	61	94	M 50 x 1,5	71	123	10	29	M 20	225	136,08	DIN 1810-A68-75
70	26	61	94	M 50 x 1,5	71	123	10	29	M 24	225	97,3	DIN 1810-A68-75
70	33	61	94	M 50 x 1,5	71	123	10	29	M 30	225	20,6	DIN 1810-A68-75
80	26	67	105	M 60 x 2	79	144	12	39	M 24	323	195,3	DIN 1810-A80-90
80	33	67	105	M 60 x 2	79	144	12	39	M 30	323	118,6	DIN 1810-A80-90
80	39	67	105	M 60 x 2	79	144	12	39	M 36	323	38,2	DIN 1810-A80-90