JW Winco

Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com

DIN 808 Stainless Steel-Universal joints with friction bearing single or double



Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description


Since the moveable parts are not surface treated, i.e. not case hardened, the possibilities of application of these universal joints are much more limited compared to the ones made of standard steel. Therefore, the guide lines for the selection of universal joints with friction bearing according to the diagram may be applied at a limited extent only. Rotational speeds over 200 min may become critical.

For continuous use of the Stainless Steel-Universal joints, ample lubrication is very important. This achieved by fitting the joint with a grease filled gaiter GN 808.1.

The order example refers to universal joints with equal bores both ends d2 or s.


Stainless steelNI
AISI 304


On request

with other or unequal bores

Technical drawing

Hide technical drawing
DIN 808 Universal joints with friction bearing, Stainless Steel sketch

Article options / Table

Bore code

BWithout keyway
KWith keyway
VWith square


EGsingle, friction bearing
DGdouble, friction bearing
Show / Hide columns
d1d2 H7
Square V
Type EG
Type DG
max. assembly
length of the shaft
166V 6*345617228
168V 8*4062202211
2210V 10*4874242612
2512V 12*5686283013
3216V 16*68105343716
4220V 20*82128414618
5025V 25*108163545526
* not available from stock, requires a minimum order quantity

Build & Price

Open 3D configurator

Outside diameter d1
Bore code

Bore d2
Square s
Length l2 (Type DG)
Length l1 (Type EG)


GN 110.1 Cross holes (special order)

Show / Hide columns
d1 H7
d1 H7
d2 H11
K / V
d2 H11
d3Length l
K / V
Length l
6-22M 344
8-33M 55,55,5
10-34M 55,56
121445M 66,57
161856M 689
20-58M 6810
22-68M 61010
25-610M 81014
3032612M 81416
35-612M 81616

Cross holes in universal joint shafts and in universal shafts are ideal for the production of shaft-hub links using a pin or a thrust screw. For bore holes with a feather key groove or square, they serve to secure the axial position of universal joint and shaft. The d2 pin bore with H11 tolerance is intended for use with coiled spring pins.
The position of the cross holes / the threaded hole with reference to the hub key slot / the square or of the universal joints is shown in the overview.
Should one of the joint sides be delivered without cross holes / threaded holes, this is indicated with QX on the desired location of the article number.

The cross hole GN 110.1 is to be ordered as a separate item in shopping cart step 1 under note.
How to order: Universal joints DIN 808-16-B6-56-DG with cross hole GN 110.1-QX-GE

How to order GN 110.1

Selected Part (How to order)

Total (net)
plus VAT 22,24 €
gross 139,27 €
In stock
Weight: 0,060 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount
With a total value (net) per order:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 50,00 €
All prices in accordance with our price list No. 53, valid from 1 May 2021, plus VAT only valid for Germany.

CAD data

Other data formats


For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

DIN 808-42-V20-128-DG-NIDIN 808-22-K10-48-EG-NIDIN 808-42-K20-82-EG-NIDIN 808-25-B12-56-EG-NIDIN 808-22-V10-74-DG-NIDIN 808-25-V12-86-DG-NIDIN 808-22-B10-48-EG-NIDIN 808-50-V25-108-EG-NIDIN 808-22-V10-48-EG-NIDIN 808-25-B12-86-DG-NIDIN 808-16-K6-34-EG-NIDIN 808-16-K8-62-DG-NIDIN 808-16-V6-34-EG-NIDIN 808-16-B6-34-EG-NIDIN 808-25-K12-56-EG-NIDIN 808-25-V12-56-EG-NIDIN 808-16-V8-62-DG-NIDIN 808-50-B25-108-EG-NIDIN 808-16-K8-40-EG-NIDIN 808-50-K25-163-DG-NIDIN 808-32-V16-105-DG-NIDIN 808-32-V16-68-EG-NIDIN 808-42-V20-82-EG-NIDIN 808-25-K12-86-DG-NIDIN 808-32-B16-105-DG-NIDIN 808-50-V25-163-DG-NIDIN 808-42-B20-128-DG-NIDIN 808-50-B25-163-DG-NIDIN 808-16-B6-56-DG-NIDIN 808-42-B20-82-EG-NIDIN 808-32-K16-68-EG-NIDIN 808-16-K6-56-DG-NIDIN 808-32-B16-68-EG-NIDIN 808-16-V6-56-DG-NIDIN 808-42-K20-128-DG-NIDIN 808-16-B8-40-EG-NIDIN 808-22-K10-74-DG-NIDIN 808-22-B10-74-DG-NIDIN 808-16-B8-62-DG-NIDIN 808-32-K16-105-DG-NIDIN 808-16-V8-40-EG-NIDIN 808-50-K25-108-EG-NI

This could also be interesting...

An error has occurred!
We have received your callback request and will contact you soon.

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM:

Request Callback
Your contact

You are looking for a Ganter partner near you? Please select the country.