|DK||With triangular spindle|
|VK7||With square spindle|
|VK8||With square spindle|
|VDE||With double bit|
|1||Operation in the illustrated position, at the top left|
|2||Operation in the illustrated position, at the top right|
|Latch distance A|
Before assembly, a nick must be made in the door as shown in the drawing below.
Depending on position of the latch, the 16,5 mm edge spacing between frame and nick must be ensured sideways and / or top and bottom to make sure that the latch is positioned behind the frame.
For the assembly, insert the front frame together with the pre-assembled latch from the front through the nick of the door by tilting.
Place the plastic tray from the back onto the bore pegs of the front frame.
The M4x12 fillister-head screws included are then screwed in from the rear and tightened to fix and wedge the whole unit in place. The minimum screw-in depth of the screw is guaranteed with a maximum door wall thickness of 7 mm.