JW Winco

Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com

GN 113.9 Stainless Steel-Ball lock pins with Stainless Steel-Knob, pin material no. AISI 303

Photo

Stainless-Steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description

Information

Stainless Steel-Ball lock pins GN 113.9 are used for quick fixing, connecting and locking of various parts and workpieces. A typical application is location pins which have to be often removed and replaced again.

By pressing the spring loaded push button both balls are unlocked and by releasing it, the balls are locked again.

The technical appendix contains the load capacities for the double-sided shearing resistance (breaking strength).

Specification

Plunger
Stainless Steel AISI 303

Knob, push button
Stainless Steel AISI 316L

Balls
Stainless Steel AISI 420C

Spring
Stainless Steel
German Material No. 1.4565




RoHS

Accessory

Ball chains GN 111 / GN 111.5
Retaining cables GN 111.2
Spiral retaining cables GN 111.4

Technical drawing

3D
Hide technical drawing
GN 113.9 Stainless Steel-Ball lock pins, pin material no. AISI 303 sketch

Article options / Table

Show / Hide columns
d1 -0,04/-0,08l1 +0,6d2d3d4l2 ±1l3 -0,2Location
bore
 H11
5101520253035404550607080---5,52310,26,220,25
6101520253035404550607080---72310,27,220,26
810152025303540455060708090100-9,52713,28,426,88
10152025303540455060708090100110120122713,29,926,810
122025303540455060708090100110120-14,53116,410,932,712
16303540455060708090100110120130140150193823,414,542,616
205060708090100110120130140150----24,83823,417,442,620
255060708090100110120130140150----30,85030,422,354,325

Build & Price

Open 3D configurator
Bolt diameter d1
Length l1

Load capacity of ball lock pins

Skizze Belastbarkeit Steckbolzen

Information
The load capacities specified in the table for the double sided shearing resistance (breaking strength) have been calculated or theoretically defined on the basis of DIN 50141.

At the same time, the endangered bolt cross-section S, according to a nearby sketch, was considered in two shear planes before breakage.

The values were arrived at by a series of tests whereby a limited number of levelling feet were subjected for a limited time to a vertical static load to the feet. In general, they do not constitute a warranty of condition.

The user must determine whether the product is suitable for the intended purpose. Environmental factors can influence the specified values.

An appropriate safety factor must be taken into account in the design.

Load capacity F in kN ≈ double sided shearing resistance acc. DIN 50141 (breaking strength)

Show / Hide columns
d1113.3113.4113.5113.6113.7113.8113.9113.10113.11113.12
514241424142414241424
621352135213521352135
838633863386338633863
106010060100601006010060100
128714487144871448714487144
16155257155257155257155257155257
20244403--244403244403244403
25386631--386631386631386631

Selected Part (How to order)

Total (net)
18,27
plus VAT 2,92 €
gross 21,19 €
In stock
Weight: 0,023 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount
With a total value (net) per order:
#artikelInfoToolTipZuschlagPosUnterWert#artikelInfoToolTipZuschlagPosVonBisWert
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



CAD Download Tutorial About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Your contact

You are looking for a Ganter partner near you? Please select the country.