Product description
Toggle clamps GN 820.4 have a safety function whereby, during closing, a spring loaded safety hook latch ensures a secure locking connection. It prevents the inadvertent unlocking of the clamp due to vibrations or an accidental attempt of loosening / opening of the clamp. To open and release the clamp, pull up on the finger grip to disengage the safety hook latch mechanism (one hand operation).
They work according to the toggle principle: lever and clamping bar move in the opposite direction. They require less space for the clamping action.
Toggle clamps in the U-bar version with two flanged washers (type NL) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type NLC.
Toggle clamps in the type PL version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component.
Specification
Tensioning mechanism
Steel
- Sheet metal parts
Case hardening steel C10, zinc plated, blue passivated - Bearing pins tempered
- Bearing rivets (for size 355 and up) case-hardened
- Moving parts lubricated with special grease
Handle
Plastic
Red, oil resistant
Flanged washers GN 898 for type NL / NLC
Steel
zinc plated, blue passivated
Clamping screw GN 708.1 for type NLC
Steel, zinc plated, blue passivated
- Thrust pad
Chloroprene rubber (CR)- Hardness 85 Shore A ≈
- Vulcanized
- Black
- Type A (flat pressure area)
RoHS
Accessory
GN 801.4 Sensor Holders
GN 801 Holders for Clamping Screws (für Form NL)
GN 801.1 Clamping Arm Extenders (für Form NL)
GN 801.2 Clamping Arm Extenders (für Form NL)
GN 809.1 Clamping Arm Extenders (für Form PL)
GN 804 Clamping Screws
GN 807 Clamping Screws (Steel)
GN 708.1 Clamping Screws (Steel)
GN 802 Clamping Screws (Steel)
GN 903 Clamping Screws (Steel)
