JW Winco

Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com

GN 810.3 Stainless Steel Toggle Clamps Operating Lever Vertical, with Lock Mechanism, with Horizontal Mounting Base

Photo

GN 810.3 Stainless Steel Toggle Clamps, Operating Lever Vertical, with Lock Mechanism, with Horizontal Mounting Base Material: NI - Stainless steel
Type: AL - Forked clamping arm, with two flanged washers
Material: NI - Stainless steel
Type: AL - Forked clamping arm, with two flanged washers
GN 810.3 Stainless Steel Toggle Clamps, Operating Lever Vertical, with Lock Mechanism, with Horizontal Mounting Base Material: NI - Stainless steel
Type: AL - Forked clamping arm, with two flanged washers GN 810.3 Stainless Steel Toggle Clamps, Operating Lever Vertical, with Lock Mechanism, with Horizontal Mounting Base Material: NI - Stainless steel
Type: CL - Forked clamping arm, with two flanged washers and clamping screw GN 708.1 GN 810.3 Stainless Steel Toggle Clamps, Operating Lever Vertical, with Lock Mechanism, with Horizontal Mounting Base Material: NI - Stainless steel
Type: EL - Solid clamping arm, with clasp for welding
Stainless-Steel

Product Family Stainless Steel

Standard parts made of rustproof stainless steel have been designed for use in the food sector, in the chemical industry, for aggressive ambient conditions or for outdoor use.

  • corrosion-resistant
  • precise fit
  • environmentally friendly
Show all Stainless Steel products

Product description

Information

Stainless steel toggle clamps GN 810.3 are latched in both end positions. In the clamped position, this prevents unintentional opening or opening caused by vibrations; and in the open position, it prevents self-closing of the toggle clamp, such as due to an extended clamping arm. The latching can be disabled with a single hand to allow for opening / closing.

They work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.

Toggle clamps in the U-bar version with two flanged washers (type AL) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type CL.

Type EL version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 holders for clamping screws to hold the work piece in place.

Specification

Stainless steelNI
AISI 304
All moving parts
Lubricated with special grease
Hand grip
High quality, oil resistant, red plastic
Clamping screw GN 708.1, type A
  • Stainless steel AISI 304
  • Rubber tip 85 Shore A

RoHS

Accessory

Clamping Screws
Holders for Clamping Screws GN 801 (for Type AL)
Holders for Clamping Screws GN 809 (for Type EL)
Clamping Arm Extenders GN 801.1 (for Type AL)
Clamping Arm Extenders GN 801.2 (for Type EL)
Clamping Arm Extenders GN 809.1 (for Type EL)

Technical drawing

3D
Hide technical drawing
GN 810.3 Stainless Steel Toggle Clamps, Operating Lever Vertical, with Lock Mechanism, with Horizontal Mounting Base sketch

Article options / Table

Type

CLForked clamping arm, with two flanged washers and clamping screw GN 708.1
ELSolid clamping arm, with clasp for welding
ALForked clamping arm, with two flanged washers
Show / Hide columns
SizeFH in N
Holding
capacity
a ≈b1b2b3d1d2 ≈h1 ≈h2h3h4h5
13010502835426,2M 65,5142281625,511,3
23020004043458,5M 86,516833,518309,5
Show / Hide columns
Sizel1 ≈
Type AL
Type CL

Type EL
l2 ≈l3
max.
l4m1m2m3m4r ≈s1s2w
Adjustable
range
130858642545512,519272979,52,5517,5
230110,5112587368182132321043620

Build & Price

Open 3D configurator
Specifications


Size
Type



Material

Selected Part (How to order)

Total (net)
59,34
plus VAT 11,27 €
gross 70,61 €
In stock
incl. material surcharge: 1,96 €
The material surcharge is already included in the price.
Weight: 0,268 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).
Please note our order discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 50,00 €
All prices in accordance with our price list No. 55, valid from 1 September 2022, plus VAT only valid for Germany.

CAD data

Other data formats

Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

GN 810.3-130-CL-NIGN 810.3-130-EL-NIGN 810.3-130-AL-NIGN 810.3-230-CL-NIGN 810.3-230-EL-NIGN 810.3-230-AL-NI

This could also be interesting...

Your contact

You are looking for a Ganter partner near you? Please select the country.

Ganter-Service

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM:

Request Callback
An error has occurred!
We have received your callback request and will contact you soon.