|AN||On the chamfer, above|
|FN||In the front, above|
|AR||On the chamfer, below|
|FR||In the front, below|
|R||Numbers ascending clockwise|
|L||Numbers ascending anti-clockwise|
Indication after one
to thread pitch
Before installation of the position indicator a bore for the torque limiting contact point is to be placed.
With the Stainless Steel Adapter Bushings GN 952.1 the hollow shaft (with Bore 14 H7) of the position indicator can be adapted to fit the spindle.
The mounting of the position indicator is via the torque limiting contact point which is connected to the hollow spindle and secured with a grub screw.
With GN 954.6 spindles can be clamped and secured after adjusting.
The position indicator is equipped with a hollow shaft that is slid directly onto the spindle and is connected to the spindle by a grub screw. The spindle rotations are transmitted to a counter directly by a gearbox. For torque support, a pin of the housing projects into a hole made on the machine side, establishing the position relative to the mounting site.
The transmission ratio and counting direction of the counter are determined by the pitch of the adjusting spindle. The indicated value after one turn starting from the 0 position serves as a characteristic value. Decimal places are indicated in red.