|R||Numbers ascending clockwise|
|L||Numbers ascending anti-clockwise|
|AN||on the chamfer, above|
|AR||on the chamfer, below|
|FN||in the front, above|
|FR||in the front, below|
Indication after 1 spindle revolution
to thread pitch
max. revolutions per minute
Filter combination produces no result.
Before installation of the position indicator, a bore hole for the torque limiting contact point is to be drilled, as shown in the in the adjacent drawing.
The position indicator is equipped with a hollow shaft that is slid directly onto the spindle and is connected to the spindle by a grub screw. The spindle rotations are transmitted to a counter directly by a gearbox. For torque support, a pin of the housing projects into a hole made on the machine side, establishing the position relative to the mounting site.
The transmission ratio and counting direction of the counter are determined by the pitch of the adjusting spindle. The indicated value after one turn starting from the 0 position serves as a characteristic value. Decimal places are indicated in red.
Our service team is available from Monday to Friday between 7am and 5:30pm:
The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.
You are looking for a Ganter partner near you? Please select the country.