GN 522.8 Spoked handwheels for position indicators GN 000.8 / GN 000.3

Photo

GN 522.8 Spoked handwheels for position indicators Type: D - with revolving handle
ELESA original design
code: VRTP.-GXX2/VRTP.-GXX+I
Type: D - with revolving handle
GN 522.8 Spoked handwheels for position indicators Type: D - with revolving handle GN 522.8 Spoked handwheels for position indicators Type: A - without handle

Product description

Information

Handwheels GN 522.8 are similar to spoked handwheels GN 522. They are, however, fitted with a housing to accept position indicators GN 000.8 and GN 000.3 and they are provided with a grub screw for fitting to the shaft.

For large adjustments, the hub bore can be provided with a keyway.

The shape of these handwheels does not only meet all demands for modern design but also covers all aspects for an ergonomical angle.




Specification

Body Plastic
Technoplymer (Polypropylen PP)
  • reinforced, shock-resistant
  • Temperature resistant up to 80 °C
  • black, matte

Hub bushing steel, blackened

Threaded bushing brass to accept the revolving handle

shiny finish to accept the revolving handle

Housing for position indicator
Technopolymer (Polyamide PA)
glass fiber reinforced

Revolving handles
Plastic, Technopolymer
black, matte

Grub screw DIN 916
with internal hexagon and serrated point



RoHS

Accessory

Position indicators GN 000.8 / GN 000.3 are to be ordered separately.

Technical drawing

3D
Hide technical drawing
GN 522.8 Spoked handwheels for position indicators sketch

Article options / Table

Bore code

Bwithout keyway
Kwith keyway

Type

Awithout handle
Dwith revolving handle
Show / Hide columns
d1d2 H7
Bore
d3d4d5bl1l2l3l4rØ
Cylindrical
handle
for position indicators
GN 000.8
GN 000.3
Size
160142640762527511280652460
200163050762834611280842460
2502035587632387012901052560

Build & Price

Outside diameter d1
Bore code


Bore diameter d2
Type


Installation sequence

1. Install the handwheel to the spindle and fix it with the screw.

2. Turn the spindle to the starting point (0-position).

3. Move position indicator „by hand“ to the 0-position before mounting it.

4. Install the position indicator into the recess of the hub and fix it with a screw.
Do not apply unnecessarily excessive torque to avoid deformation of the housing!

5. Rotate the handwheel and ascertain that the starting point of the spindle is aligned with the 0-position of the two pointers (Position indicators GN 000.8 (Pendulum system, analog indication)) respectively pointer and counter (Position indicators GN 000.3 (Pendulum system, digital / analog indication)).
Should that not be the case the screw has to be loosened and the position indicator adjusted. Tighten the screw again.

Selected Part (How to order)

Total (net)
33,07
plus VAT 6,28 €
gross 39,35 €
In stock
Weight: 0,340 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.