Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
GN 274.1 swivel clamp linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).
RoHS
| OZ | Without centring step (smooth) |
| MZ | With centering step |
| AV | With male serration |
| IV | With female serration |
| 2 | With stainless steel socket cap srew DIN 912 |
| d1 Bore B without slide insert | Bore G with slide insert | b Swivel width | d2 | d3 Clamping thread | d4 | d5 Mounting screw on the follower | k | Length l | m | s | Clamping lever for d3 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| B 30 | G 30 | 40 | 8,5 | M 8 | M 8 | M 4 | 40 | 95 | 43 | 13 | 911-M8-32 |
| B 40 | G 40 | 65 | 10,5 | M 10 | M 10 | M 5 | 65 | 148 | 70 | 17 | 911-M10-55 |
| B 50 | G 50 | 65 | 10,5 | M 10 | M 10 | M 6 | 65 | 148 | 70 | 17 | 911-M10-55 |
Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100
