Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Breather strainers GN 7403 are used in enclosure and device construction. Inserted into the wall of the enclosure, they ensure pressure equilibrium between the inside of the enclosure and the outside.
Any dirt and dust particles carried by the medium (usually gas) are prevented from exiting depending on the mesh size. This protects the insides of sensitive devices and machinery parts from dirt and pollution and also protects the environment from any exiting dust.
The outside diameter of the enclosure with the recessed hexagon matches the bolt mounting holes for DIN 3852 threaded pipe connectors.
The sealing ring is embedded in a radial and plane-sided recess which makes the seal captive and prevents it from being squeezed out during tightening.
Assembly instruction:
For mounting on walls of less than 4 mm thickness please use a mounting nuts GN 7430.
Body
Stainless steelNI AISI 303
Strainer
Stainless steel mesh AISI 304
Strainer bezel
Plastic (Polyamide PA)
Sealing / O-ring
Rubber NBR (Perbunan®)
RoHS
Stainless Steel Mounting Nuts GN 7430
Body in brass
Other mesh size
Other material for the strainer
| d1 | Mesh size in µm | d2 | d3 | l1 | l2 | s | ||
|---|---|---|---|---|---|---|---|---|
| G 1/2 | M 20 x 1,5 | 100 | 500 | 26 | 10 | 8,5 | 7,5 | 23 |
| G 3/4 | M 26 x 1,5 | 100 | 500 | 32 | 14 | 9 | 8 | 30 |
| G 1 | M 33 x 1,5 | 100 | 500 | 40 | 20 | 11 | 8,5 | 36 |
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
