GN 345 Levelling feet Threaded stud steel, zinc plated / Foot plastic with two fixing holes


GN 345 Levelling feet, Plastic / Steel Type: BG - with nut, with rubber underlay
ELESA original design LV.F.
Type: BG - with nut, with rubber underlay
GN 345 Levelling feet, Plastic / Steel Type: BG - with nut, with rubber underlay GN 345 Levelling feet, Plastic / Steel Type: A - without nut, without rubber underlay GN 345 Levelling feet, Plastic / Steel Type: AG - without nut, with rubber underlay GN 345 Levelling feet, Plastic / Steel Type: B - with nut, without rubber underlay

Product description


Levelling feet GN 345 are capable of withstanding high static loads through the use of a high density plastic material coupled with a design which distributes the load over a larger area.

The values given in the table regarding the static load capacity serve as a guide line only and if these are exceeded serious permanent deformation or breakage of the plastic socket could occur.

The above values have been arrived at by a series of tests whereby a limited number of levelling feet were subjected for a limited time to a vertical static load to the feet.

The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

The fixing holes are closed by a thin plastic layer, which may be easily punctured.

Levelling feet GN 345 are supplied assembled, but are removable.


Plastic Technopolymer (Polyamide PA)
  • glass fiber reinforced
  • black, matte
  • temperature resistant up to 100 °C

Threaded stud
Steel zinc plated, blue passivated
- Tensile strength class 5.8

Hexagon nut ISO 4032
Steel zinc plated, blue passivated

Rubber underlay (NBR)
70 Shore A, black


Technical drawing

Hide technical drawing
GN 345 Levelling feet, Plastic / Steel sketch

Article options / Table


Awithout nut, without rubber underlay
Bwith nut, without rubber underlay
AGwithout nut, with rubber underlay
BGwith nut, with rubber underlay
Show / Hide columns
d1d2l1l2l3l4d3kA/FBall-ØStatic load in kN
(see information)
80M 84368--3323248,554141416
80M 10436898-3323248,554141416
80M 12436898-3323248,554141416
80M 146898148-3323248,554141416
80M 16681081481683323248,554161416
80M 1658981381584323248,554242418
80M 20981381581984323248,554242418
80M 24981381581984323248,554242418
100M 84368--33232412,570141418
100M 10436898-33232412,570141418
100M 12436898-33232412,570141418
100M 146898148-33232412,570141418
100M 166810814816833232412,570161418
100M 16589813815843232412,570242425
100M 209813815819843232412,570242425
100M 249813815819843232412,570242425
125M 209813815819867234612,595242428
125M 16589813815867234612,595242428
125M 249813815819867234612,595242428

Build & Price

Foot diameter d1
Thread d2
Thread length l1

Selected Part (How to order)

Total (net)
plus VAT 0,86 €
gross 5,36 €
In stock
Weight: 0,087 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data


For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.

JW Winco, USA

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.


Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.