Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com
Stainless steel latches GN 115 lock by a turning operation limited to 90° which moves the latch arm in the locked position behind the door frame. The bevels of the latch arm ease the closing of the door.
Thanks to the stainless steel materials used, the latches are optimally suited for use in corrosive environments.
Latch arms are available with different bend angles to cover a latch arm distance A from 6 to 50 mm.
Stainless steel latches GN 115 are supplied with loosely enclosed latch arm.
RoHS
| RG | With knurled knob GN 7336 |
| KG | With wing knob |
| HG | With lever |
| SG | With star knob |
| KGN | With stainless steel wing knob |
| HGN | With stainless steel lever |
| Latch distance A | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 | 10 | 14 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 34 | 38 | 40 | 50 |
|
For installation, set a hole in the door, cover or hatch as shown in the outline drawing. Once assembled, the latch is pushed through the bore diameter from the front. The hexagon nut can then be pushed over the latch from the back and bolted in place. The required installation bore in the door leaf, is usually generated by punching or laser machining in series production. The installation bore diameter can also be created by drilling or milling as shown in the outline drawings. For small series and steel sheets below 2 mm thickness, the Sheet Metal Punches 123 are the tool of choice. |
||||||||||
Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0
