GN 239.4 Hinges Plastic / with connector plug M12x1

Photo

GN 239.4 Hinges with connector plug Identification: SL - Bores for contersunk screw, switch left
Type: AS - Connector plug at the top
ELESA original design

code: CFSQ,
Identification: SL - Bores for contersunk screw, switch left
Type: AS - Connector plug at the top
GN 239.4 Hinges with connector plug Identification: SL - Bores for contersunk screw, switch left
Type: AS - Connector plug at the top GN 239.4 Hinges with connector plug Identification: SL - Bores for contersunk screw, switch left
Type: CS - Connector plug at the back GN 239.4 Hinges with connector plug Identification: SR - Bores for contersunk screw, switch right
Type: AS - Connector plug at the top GN 239.4 Hinges with connector plug Identification: SR - Bores for contersunk screw, switch right
Type: CS - Connector plug at the back

Accessories for profile systems

Standard elements in this product family are compatible with the most common aluminium profile systems. Using matching assembly sets, the Ganter standard elements are easily and cost-effectively connected with the profiles without the time-consuming compiling of individual parts in the order.

  • compatible with the common profile systems
  • for groove widths of 6, 8 and 10 mm
  • for profiles 30, 40 and 45 mm

Further information on products for profile systems:

Product description

Information

Hinges GN 239.4 with integrated two-way switch are suitable for detecting the status of doors, covers and guards on machines and equipment. Opening the door will activate the switching contact, allowing changes in the door status to be detected electrically depending on the wiring of the contacts (NC or NO).

The hinges with their integrated two-way switch are a compact, tamper-proof and easy to install unit, featuring an ultrasound-welded enclosure.

Operating instructions containing other important technical information are included with every hinge.


Specification

Plastic
  • glass fiber reinforced
  • black, matte
  • Temperature resistant up to 80 °C

Pin
Stainless Steel
AISI 303





RoHS

Accessory

Cable with connector coupling
4-pole, 5 or 10 meter long:
  • GN 330-M12x1-4-G-5
  • GN 330-M12x1-4-G-10

Technical drawing

Hide technical drawing
GN 239.4 Hinges with connector plug sketch

Article options / Table

Identification

SLBores for contersunk screw, switch left
SRBores for contersunk screw, switch right

Type

ASConnector plug at the top
CSConnector plug at the back
Show / Hide columns
l1l2h1h2h3h4l3l4l5m1m2
70531681614,511051,522,54534

Build & Price

Specifications

Width l1
Length l2
Identification


Type


Mechanical features

Maximal load

Information without safety factor

Examples of calculation



Load
direction

→ see Operating instruction

Load F in N

2100

2800

1300

Fixing

Types SH, SL und SR with countersunk
for countersunk screws e.g. DIN 7991

Recommended torque

5 Nm (Screws M6)

Protection class

IP67

acc. to EN 60529

Switching principle, contact opening

Changeover contact, with positive opening

according to IEC 60947-5-1

one operating cycle includes one opening and one closing action

Contact material

Silver alloy Ag 90 Ni 10

Operating travel diagram
(scheme)

The switching points are fix
at 6°. By reaching the lifespan,
it can rise up to 9°.
→ see operating instruction

Maximum operating frequency

600 operating cycles / hour

Mechanical life span

106 operating cycles

according to IEC 60947-5-1

one operating cycle includes one opening and one closing action

Actuating speed

min. 2° / second, max. 90° / second

Electrical and safety features

Utilization category

DC 13: 24 Vdc / 4A or 127 Vdc / 0,3A
AC 15: 220 Vac / 4A or 440 Vac / 3A

acc. to EN 60947-5-2
acc. to EN 60947-5-1

Contact termination
4-pole plug M12
or cable with 2 m or 5 m length
Pin and cable assignment

Type of cable

UL/CSA STYLE 2587 3X AWG 22

Short-circuit current

1000 A

Rated insulation voltage

250 V

Short-circuit protection

6 A, 500 V, Typ gl

Ambient temperature

- 20 °C up to + 80 °C

Degree of pollution, external

3

Mission time (TM)

20 years

Number of cycles (B10 d)

2 000 000

Approvals, Conformities

Low-voltage switchgear and controlgear

CE declaration

EN 60947-1-5 : 2003 + A1/2009

Other important details and hints are given in the operating instructions for GN 239.4 hinges which are included with every hinge and which are also available as PDF downloads from Operating instructions.
The hinges with switch must be mounted and commissioned by qualified technical personnel in compliance with the details given in the operating instructions and with the national and international rules and regulations and the applicable standards. Otto Ganter GmbH & Co. KG will assume no statutory liability for missing or incorrect information and for any consequences arising therefrom.

Selected Part (How to order)

Weight: 0,139 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.