GN 810.3 toggle clamps are latched in both end positions. In the clamped position, this prevents unintentional opening or opening caused by vibrations; and in the open position, it prevents self-closing of the toggle clamp, such as due to an extended clamping arm. The latching can be disabled with a single hand to allow for opening / closing.
They work according to the toggle principle: lever and clamping bar move in the same direction. In the clamped position the operating lever is in its vertical position.
Toggle clamps in the U-bar version with two flanged washers (type AL) can accommodate an application specific clamping screw. A clamping screw with neoprene rubber tip is also included for type CL.
Type EL version can either be utilized by welding the clasp which can then accommodate an application specific hold-down fastener component, or by utilizing the bar in conjunction with the GN 809 holders for clamping screws to hold the work piece in place.
Case-hardened steel C10
zinc plated, blue passivated
Bearing pins tempered
All moving parts
lubricated with special grease
High quality, oil resistant, red plastic
Clamping screw GN 708.1, type A
Steel, zinc plated
Rubber tip 85 Shore A
Holders for clamping screws GN 801 (for type AL)
Holders for clamping screws GN 809 (for type EL)
Clamping arm extenders GN 801.1 (for type AL)
Clamping arm extenders GN 801.2 (for type EL)
Clamping arm extenders GN 809.1 (for type EL)
Hide technical drawing
Article options / Table
U-bar version, with two flanged washers and clamping screw GN 708.1
If this article is new in our product range, it may happen that details concerning weight are as yet not listed. If you do need weight details, please contact our Sales Department! Phone+49 7723 6507 - 0
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order: from 175,00 Euro -> 10 % discount from 275,00 Euro -> 20 % discount from 375,00 Euro -> 30 % discount With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.