J.W. Winco

Our customers in the USA are managed by J.W. Winco. Please, use the website of J.W. Winco: jwwinco.com

GN 862 Toggle clamps pneumatic, with angled base


Product description


The clamping principle of GN 862 toggle clamps is identical in construction and dimensions to the manually operated GN 812 vertical toggle clamps.

To ensure an extended life of the mechanical parts as well as the air cylinders the operating pressure should not exceed 6 bar.

GN 862 toggle clamps are also available in sizes 200 and up as a version M (magnetic piston). In conjunction with a GN 896.2 proximity switch, the end position can be sensed and the generated impulse can be used to transmit an electrical signal.


Parts in sheet metal
Case-hardened Steel C10
zinc plated, blue passivated

Bearing pins hardened

Bearing rivets case-hardened

Air cylinder bearing pins

Double-action air cylinder
max. pressure 6 bar

All moving parts
lubricated with special grease

Spindle assembly GN 708.1, type A
  • Steel, zinc plated
  • Rubber tip 85 Shore A



Clamping screws
Holders for clamping screws GN 801
(for type APV3)
Holders for clamping screws GN 809
(for type EPV3)
Proximity switches GN 896.2

Technical drawing

Hide technical drawing
GN 862 Toggle clamps, pneumatic, with angled base sketch

Article options / Table


APV3U-bar version, with two flanged washers
CPV3U-bar version, with two flanged washers and clamping screw GN 708.1
EPV3Solid clamping bar with clasp for welding
Show / Hide columns
SizeFH in N
FS in N
Clamping force
at 4 bar ≈
ab1b2b3b4b5d1d2d3Inside Ø
20016009703459,538,551358,5M86,5G 1/8439,5
300240010504268,55360,55010,3M108,5G 1/4650,5
Show / Hide columns
Sizeh1 h2h3h4h5l1 l2 l3
Adj. Range

Build & Price

Open 3D configurator


Selected Part (How to order)

Total (net)
plus VAT 28,72 €
gross 179,88 €
In stock
Weight: 1,150 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data


For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Partner Logo
J. W. Winco, our Partner in the USA
Our customers in the USA are served by J. W. Winco. Please use the website of J. W. Winco.
J. W. Winco, unser Partner in der USA
Unsere Kunden in der USA werden durch J. W. Winco betreut. Bitte benutzen Sie die Webseite von J. W. Winco.
Go to J. W. Winco
Zu J. W. Winco wechseln

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.


Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.