JW Winco

Our customers in the USA are managed by JW Winco. Please, use the website of JW Winco: jwwinco.com

GN 9053 Position Indicators Digital Indication, 6 digits, Electronic, with LCD-Display

Photo

GN 9053 Position Indicators, Digital Indication, 6 digits, Electronic, with LCD-Display Color: OR - Orange, RAL 2004
ELESA original design
code: DD52R-E
Color: OR - Orange, RAL 2004
GN 9053 Position Indicators, Digital Indication, 6 digits, Electronic, with LCD-Display Color: OR - Orange, RAL 2004 GN 9053 Position Indicators, Digital Indication, 6 digits, Electronic, with LCD-Display Color: GR - Gray, RAL 7035

Product description

Information

Electronic position indicators GN 9053 with LCD display are extremely versatile in use, with virtually every counting option selectable directly at the device via the operating keys. The power necessary for the display is supplied by a long-life battery.

The indicators are plugged directly onto the spindle via their hollow shaft, with the torque support defining the position for the mounting site. Mounted in this way, the indicators will detect the rotary spindle movement and show the appropriate value on the display.

Both housing sections are ultrasonically welded, making the housing highly tight, stable and compact.

The foam rubber seal prevents the transmission of vibrations and also acts as a seal.

Specification

Housing
Plastic (Polyamide PA)
  • Orange, RAL 2004OROR
  • Gray, RAL 7035GRGR
  • Temperature resistant up to 50 °C
  • Oil and solvent resistant

LCD-Display
6 digits and special characters
Hollow shaft
Stainless steel AISI 304
Seal
O-ring
Rubber NBR (Perbunan®)
(only for identification no. 2)

RoHS

On request

Housing
Plastic (Polyamide PA)
Black-gray, RAL 7021SGSG

Technical drawing

3D
Hide technical drawing
GN 9053 Position Indicators, Digital Indication, 6 digits, Electronic, with LCD-Display sketch

Article options / Table

Identification no.

1Protection class IP 65
2Protection class IP 67

Build & Price

Open 3D configurator
Identification no.


Color
GR
OR
SG

Installation instructions

Montagehinweise GN 9053

Before installation of the position indicator, a bore hole for the torque limiting contact point is to be drilled, as shown in the in the adjacent drawing.

With the mounting adaptor bushings Stainless Steel Adapter Bushings 952.1
the hollow shaft (with bore 14 H7) of the position indicator can be adapted to fit the spindle.

If a reduction in the diameter of the hollow shaft is to be made at the same time as mounting a control knob, Control Knobs 957 are available which combine both functions in a single component (no adaptor bushings required).

The position indicator is mounted with the torque limiting contact point inserted in the bore hole, to stabilize the housing in place. The hollow shaft is mounted to the spindle and secured with the grub screw.

With Clamping Plates 9053.6 spindles can be clamped and secured after adjusting.

Operating principle

The electronic position indicators GN 9053 / GN 9054 are very similar to the mechanical position indicators GN 953 / GN 954 / GN 955 with regard to installation and external dimensions and can normally replace them.
The protection class IP 65 or IP 67 of the housing permits use in wet areas, even in contact with direct streams of water.
The measurement of the spindle rotations takes place directly, electronically and without contact. The required energy is supplied by a lithium battery with a lifespan of 5 or 8 years that can be easily replaced.
The special advantage of the electronic position indicator lies in its programmability. Nearly any desired counting option can be configured directly on the device using the function buttons.

Drawing Operating principle GN 9053 GN 9054

with 3 or 4 function buttons, it is possible to:
--Switch between incremental and absolute measurement modes
--Change the unit of measurement (mm, inches or degrees)
--Reset the counter or set an offset value
--Change the display after one rotation of the shaft and set the resolution, in other words, the number of decimal places displayed
--Set the direction of rotation / counting direction
--Adjustment for the display orientation (depending on the installation situation) and the maximum rotation speed

Selected Part (How to order)

Total (net)
158,47
plus VAT 30,11 €
gross 188,58 €
In stock
Weight: 0,129 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone +49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances).
Please note our order discounts.
With a total value (net) per order:
from 175,00 € -> 10 % discount
from 275,00 € -> 20 % discount
from 375,00 € -> 30 % discount

Surcharge for small volume purchases:
-> 15,00 Euro
for value of goods less than 25,00 €
-> 10,00 Euro
for value of goods from 25,00 to 50,00 €
All prices in accordance with our price list No. 55, valid from 1 September 2022, plus VAT only valid for Germany.

CAD data

Other data formats

Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

CAD Download Tutorial About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM: +49 7723 6507 - 0

To the customised elements | To the contact persons

GN 9053-1-ORGN 9053-2-ORGN 9053-1-GRGN 9053-2-GR

This could also be interesting...

An error has occurred!
We have received your callback request and will contact you soon.
Ganter-Service

Our service team is available from Monday to Friday between 7:00 AM and 5:30 PM:

Request Callback
Your contact

You are looking for a Ganter partner near you? Please select the country.