GN 323.9 Disc handwheels for position indicators GN 000.9 / GN 000.13

Photo

GN 323.9 Disc handwheels for position indicators Type: R - with revolving handle
Type: R - with revolving handle
GN 323.9 Disc handwheels for position indicators Type: R - with revolving handle GN 323.9 Disc handwheels for position indicators Type: A - without handle

Product description

Information

Disc handwheels GN 323.9 have a recessed hub to accept position indicators GN 000.9 / GN 000.13.

The pallet pin is screwed in and held in position with the hexagon locknut.The length of the pallet pin l5 can be adjusted as required.

Specification

Aluminum gravity die casting
  • Hub machined
  • Rim turned on all sides
  • Wheel body
    plastic coated
  • black, textured finish

Rim concentric and square to bore IT 12

Gear wheel
Plastic (Polyamide PA)
glass fiber reinforced

Screw for pallet pin
Steel blackened, injected

RoHS

Accessory

Position indicators GN 000.9 / GN 000.13 are to be ordered separately.

Technical drawing

3D
Hide technical drawing
GN 323.9 Disc handwheels for position indicators sketch

Article options / Table

Bore code:

Bwithout keyway
Kwith keyway

Type

Awithout handle
Rwith revolving handle
Show / Hide columns
d1d2 H7
Bore
d3d4d5d6abl1l2 ≈l3l4l5Ø
Handle
GN 798
for position
indicators
GN 000.9
Size


GN 000.13
Size
80102020,5656191322,5553,511,513,61642-
100102020,5656191422,563,53,511,513,61842-
125123222,567628,51522,565,541222226060
160143225,567828,51823,571,541324246060

Build & Price

Outside diameter d1
Bore code


Bore diameter d2
Type


Installation sequence

1. Turn spindle into the starting position (0-position).

2. Set the length of the pallet pin and lock in place with hex nut. Make sure that the pin does not sit on the drill hole base after mounting the handwheel.

3. Move the position indicator to the 0 position by turning the outer gear wheel.

4. Hold the (unmounted) handwheel such that the hole for the gear pinion is in the “12 o‘clock“ position and turn the crown wheel until the pallet pin is in the recess bore at the machine body.

5. Carefully insert the position indicator into the hand knob, making sure that the gear pinion engages in the crown wheel. The crown wheel may need to be readjusted slightly during this step.

Secure the position indicator with the thumbscrew, avoiding excessive tightening torque to prevent the housing from deforming.

6. Place the hand knob onto the spindle and fix in place with the thumbscrew.

7. Check by turning the hand knob to ensure that the starting position of the spindle and the 0-position of both pointers coincide.

If necessary, take out and readjust the position indicator.

Selected Part (How to order)

Total (net)
35,38
plus VAT 6,72 €
gross 42,10 €
In stock
incl. material surcharge: 0,36 €
The material surcharge is already included in the price.
Weight: 0,267 kg
If this article is new in our product range, it may happen that details concerning weight are as yet not listed.
If you do need weight details, please contact our Sales Department!
Phone+49 7723 6507 - 0
RoHS: Yes
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Please note our quantity discounts.
With a total value (net) per order:
from 175,00 Euro -> 10 % discount
from 275,00 Euro -> 20 % discount
from 375,00 Euro -> 30 % discount
With a total value (net) per order:
All prices in accordance with our price list No. 52, valid from 1 May 2019, plus VAT only valid for Germany.

CAD data

Quick-Login

For getting CAD data please enter you Email adress. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.



About CAD-Downloads
Save as favourite

Please enter the code you can find in the picture.

Do you find your product ?

Our Service-Team is available from Monday to Friday from 7:00 until 17:30: +49 7723 6507 - 100

To the customised elements | To the contact persons

This could also be interesting...

Hinweis zur Weiterleitung

Für diese Landesversion verlassen Sie die aktuelle Webseite und werden zur jeweiligen Landesvertretung weitergeleitet. Bitte beachten Sie, dass es zu Abweichungen von Darstellung und Inhalten kommen kann.

Sie werden nicht automatisch weitergeleitet. Bitte klicken Sie den unten genannten Link.

Note about forwarding

For this country version you leave the current website and are forwarded to the respective country representation. Please note that there may be deviations in presentation and content.

You will not be redirected automatically. Please click on the link below.


JW Winco, USA
Cancel
Ganter-Service

Our service team is available from Monday to Friday between 7am and 5:30pm:

+49 7723 6507 - 0

Or use the practical callback service:

Privacy Policy

Ganter Catalogue

The new catalogue with countless standard parts and elements and many exciting ideas for constructive problem solutions.

 

Ask for it free of charge

Ganter sales partners

You are looking for a Ganter partner near you? Please select the country.